TECHNICAL DATA
- Curved insulated flap, 33mm thickness with three alveolar chambers. With insulating panel inserted in the central chamber
- ABS corner fittings
- Entirely built in condensation-proof impact-resistant PVC
- Smooth surface flap to improve the flow of incoming air and minimise dust deposits
- Arc-welded and galvanised protective mesh. (stainless steel on request)
- One important feature of our air inlets is the option for personalized sizing relative to the housing wall, depending on the thickness of the wall and installation needs.
- See our wide range of accessories and optionals for complete installation
TECHNICAL SHEET
Air flow rate m³/h at the negative pressure for the various models
MODEL | JET C 23/60 |
JET C 23/80 |
JET C 23/100 |
JET C 23/120 |
JET C 23/150 |
JET C 30/60 |
JET C 30/80 |
JET C 30/100 |
JET C 30/120 |
JET C 30/150 |
JET C 37/60 |
JET C 37/80 |
JET C 37/100 |
JET C 37/120 |
JET C 37/150 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
m³/h a 10Pa | 1500 | 1900 | 2500 | 2900 | 3500 | 1800 | 2300 | 3000 | 3700 | 4600 | 2200 | 2800 | 3600 | 4400 | 5200 |
m³/h a 20Pa | 2100 | 2700 | 3600 | 4200 | 5100 | 2600 | 3400 | 4400 | 5300 | 6400 | 3800 | 4600 | 5200 | 5700 | 6500 |
m³/h a 40Pa | 2700 | 3600 | 4100 | 4600 | 5800 | 3600 | 4200 | 5600 | 6500 | 7700 | 4600 | 5600 | 7000 | 8000 | 9200 |
Strength Kg.* | 2,2 | 2,4 | 2,6 | 2,8 | 3,2 | 2,3 | 2,5 | 2,6 | 2,8 | 3,4 | 2,4 | 2,7 | 2,8 | 3,2 | 3,8 |
*Strength required in Kg. to close the JET flap