TECHNICAL DATA
- Completely independent, doesn't need any type of automation (reduction motors, cables, control unit with vacuum gauge)
- Entirely built in condensation-proof impact-resistant PVC
- ABS corner fittings
- Alveolar PVC «curved» flap for best orientation of the incoming air flow. (Plain flap for DP JET 11 e 35)
- Smooth surface flap to improve the flow of incoming air and minimise dust deposits
- Arc-welded and galvanised protective mesh. (stainless steel on request)
- One important feature of our air inlets is the option for personalized sizing relative to the housing wall, depending on the thickness of the wall and installation needs
- See our wide range of accessories and optionals for complete installation
TECHNICAL SHEET
Air flow rate m³/h at the negative pressure for the various models
MODEL | DP JET 23/80.. |
DP JET 23/100.. |
DP JET 30/80.. |
DP JET 30/100.. |
||
---|---|---|---|---|---|---|
m³/h a 20Pa | 1900 | 2200 | 2500 | 3200 | ||
m³/h a 40Pa | 2700 | 3000 | 3200 | 4000 | ||
Opening span (cm) (flap completely open): | ||||||
1650 | 2180 | 2170 | 2870 |